Table of Contents
Advertisement
ESC
use your choice of
connector rated
OPtional ESC
installation
page 29
Double - side Tape
( Accessories Bag )
Motor wires
2 x Cable Tie
Use 3 x cable ties, to secure the Throttle ESC wire to the main frame. Use the Frame
built-in socket for best holding. In this Step connect the Motor and ESC Wires but don't
secure yet. Wait till the final motor rotation check, once the FBL system is set up.
NOTE: To reverse Motor rotation direction , just switch 2 of the 3 wires.
Chapter 13: ESC Installation
Be carefully Motor wire
and ESC will not touch
Motor/Pinion.
Battery wires
Advertisement
Table of Contents
