Calculation Formulas For Projection Distance By Lens Types - Panasonic PT-DW5000UL Operating Instructions Manual

Installation

Calculation formulas for projection distance by lens types

• PT-D5600U, PT-D5600UL
Screen aspect ratio 4:3
Standard
zoom lens
Wide-angle fixed-
focus lens
Wide-angle
zoom lens
Intermediate-focus
zoom lens
Long-focus
zoom lens
Ultra-long-focus
zoom lens
Screen aspect ratio 16:9
Standard
zoom lens
Wide-angle fixed-
focus lens
Wide-angle
zoom lens
Intermediate-focus
zoom lens
Long-focus
zoom lens
Ultra-long-focus
zoom lens
• PT-DW5000U, PT-DW5000UL
Screen aspect 16:9
Standard
zoom lens
Wide-angle fixed-
focus lens
Wide-angle
zoom lens
Intermediate-focus
zoom lens
Long-focus
zoom lens
Ultra-long-focus
zoom lens
• The dimensions in the table in pages 17-19 and the values obtained from the above formulas may
Note
contain slight errors.
• When an SXGA signal is input and projected, the right and left ends of the picture will be blanked
and the aspect ratio will be 5:4.
• The brightness is different between the wide lens position settings and telephoto lens position
settings.
20
Minimum (LW)
Maximum (LT)
Model No. :
ET-DLE050
Model No. : Minimum (LW)
ET-DLE100 Maximum (LT)
Model No. : Minimum (LW)
ET-DLE200 Maximum (LT)
Model No. : Minimum (LW)
ET-DLE300 Maximum (LT)
Model No. : Minimum (LW)
ET-DLE400 Maximum (LT)
Minimum (LW)
Maximum (LT)
Model No. :
ET-DLE050
Model No. : Minimum (LW)
ET-DLE100 Maximum (LT)
Model No. : Minimum (LW)
ET-DLE200 Maximum (LT)
Model No. : Minimum (LW)
ET-DLE300 Maximum (LT)
Model No. : Minimum (LW)
ET-DLE400 Maximum (LT)
Minimum (LW)
Maximum (LT)
Model No. :
ET-DLE050
Model No. : Minimum (LW)
ET-DLE100 Maximum (LT)
Model No. : Minimum (LW)
ET-DLE200 Maximum (LT)
Model No. : Minimum (LW)
ET-DLE310 Maximum (LT)
Model No. : Minimum (LW)
ET-DLE410 Maximum (LT)
(L, LW, LT : m SD : inch)
L=0.0370 x SD-0.0650
L=0.0488 x SD-0.0638
L=0.0166 x SD-0.0361
L=0.0276 x SD-0.0452
L=0.0372 x SD-0.0478
L=0.0504 x SD-0.0657
L=0.0824 x SD-0.0758
L=0.0795 x SD-0.1380
L=0.1232 x SD-0.1310
L=0.1176 x SD+0.0244
L=0.1646 x SD+0.0651
(L, LW, LT : m SD : inch)
L=0.0403 x SD-0.0650
L=0.0532 x SD-0.0638
L=0.0181 x SD-0.0361
L=0.0301 x SD-0.0452
L=0.0405 x SD-0.0478
L=0.0549 x SD-0.0657
L=0.0898 x SD-0.0758
L=0.0866 x SD-0.1380
L=0.1342 x SD-0.1310
L=0.1281 x SD+0.0244
L=0.1793 x SD+0.0651
(L, LW, LT : m SD : inch)
L=0.0409 x SD-0.0650
L=0.0539 x SD-0.0638
L=0.0183 x SD-0.0361
L=0.0305 x SD-0.0452
L=0.0411 x SD-0.0478
L=0.0556 x SD-0.0657
L=0.0910 x SD-0.0758
L=0.0799 x SD-0.1062
L=0.1043 x SD-0.1056
L=0.1061 x SD-0.1374
L=0.1983 x SD-0.1352