Network Config Page; Network Status Page - Panasonic PT DW5100UL Operating Instructions Manual

Network config page

Click [Network set up], then [Network config] to display the Network config page.
Enter the name of the projector here. Enter the host name
here if it is required when the DHCP server is going to be
used, for instance.

Network status page

Click [Network set up], then [Network status] to display the Network status page.
Set this to ON to enable the DHCP client
function.
Enter the IP address if DHCP server is
not used.
Enter the subnet mask if DHCP server is
not used.
Enter the gateway address if DHCP
server is not used.
Network software version display
Set IP address display
Set subnet mask display
MAC address display
Network status display
49