Using The Function Buttons - Panasonic PT-AE1000E Remote Control Operating Manual

Panasonic lcd projector remote control operating guide pt-ae1000e
Hide thumbs Also See for PT-AE1000E:
Table of Contents

Advertisement

Using the function buttons

Function buttons [1], [2] and [3] can be used as quick shortcut buttons by assigning operations
that are frequently used to them.
Setting method
-Use the projector's menu to make the settings
1
Press "MENU" on either the remote control
or the projector's operation panel.
Remote control
2
Select "OTHER SETTINGS" from the main
menu, and then press "ENTER". Next,
select "FUNCTION BUTTONS" from the
sub-menu and then press "ENTER".
FUNCTION BUTTON
FUNCTION BUTTON1
FUNCTION BUTTON2
FUNCTION BUTTON3
3
Press the top or bottom of the tilt button to
select the "FUNCTION" button (1--3) to be
set.
4
Press the left or right of the tilt button to
select the function to be set for the
"FUNCTION" button.
The selected item will change as shown below
each time the tilt button is pressed.
DESABLE
HDMI2 IN
HDMI1 IN
PC IN
SCART IN
Projector's operation
panel
OFF
OFF
OFF
SHUTTER
AUTO SETUP
VIDEO IN
S-VIDEO IN
COMPNENT IN
Function button is disabled.
DISABLE
Operates the shutter function.
When the shutter operates at times
such as when not using the projector
for fixed periods, the pictures turn off
and power consumption is reduced.
When any button on the remote
control
or the projector's operation panel is
SHUTTER
pressed, the shutter function is
cancelled and pictures can be
projected again.
However, this does not apply for the
remote control's "LIGHT" button and
the system device operation buttons.
AUTO SETUP
Starts automatic position correction
VIDEO IN
Switches input to video input.
S-VIDEO IN
Switches input to S-video input.
Switches input to component input.
COMPONENT IN
Switches input to SCART input.
SCART IN
Switches input to computer input.
PC IN
HDMI1 IN
Switches input to HDMI1 input.
HDMI2 IN
Switches input to HDMI 2 input
Note:
If remote control signals for home theatre system
devices or operation macros have been assigned to
the "FUNCTION" buttons, the functions assigned to
the "FUNCTION" buttons by the above procedure will
not work.
E
NGLISH
- 13

Advertisement

Table of Contents
loading

Table of Contents