Using The Operation Macro Function; Clearing The Operation Macro Function - Panasonic PT-AE1000E Remote Control Operating Manual

Using the operation macro function

Note:
If the distance between the remote control and the home
theatre equipment being operated is too far, or if the remote
control receivers of the home theatre system devices are
obstructed, the home theatre system devices may not work
correctly.
Check the locations and directions of the home theatre
system devices to make sure that they can all be operated.
1
Press "DEVICE", use the tilt button to
select "PJ" or "USER1-3", and then press
"ENTER".
2
Press the button which has the macro
recorded that you would like to use.
The amount of time that will pass before the macro function is
completed will vary depending on the number of keypresses which
have been recorded.
Operating home theatre system devices with a
single button press(operation macro function)
(Example: When "PJ" is selected)
(Example: When "USER1" is selected)
(Example: When "MC5" is selected)
Clearing the operation macro
function
1
Press "SETUP" for 3 seconds or more.
2
Use the tilt button to select "PJ", and then
press "ENTER".
3
Press "ENTER".
4
Press the top or bottom of the tilt button to
select "MACRO1-6?" and then press
"ENTER".
5
Press "ENTER", and then press "SETUP"
twice.
Press twice.
E
NGLISH - 11