Rear Panel - TP-Link NC450 User Manual


System LED:
Status
Flashing Red
Solid Red
Flashing Green
Solid Green
 Microphone: The camera has a built-in internal microphone. This microphone is hidden in
the pinhole located on the front panel.

2.2.2 Rear Panel

Speaker
Micro SD Card Slot
 Speaker: For audio output.
 Micro SD Card Slot: For holding the micro SD card.
 Internet Port: For connecting the camera to your router via an Ethernet cable.
 Power Jack: For connecting the camera to power socket via the provided power adapter.
 WPS/Reset Button: The switch for the WPS and Reset function. To use the WPS function,
press it for about 2 seconds. To use the Reset function, press and hold for more than 5
seconds.
NC450 HD Pan/Tilt Wi-Fi Camera with Night Vision
The camera starts booting up.
The camera has boot up, but is not connected to any
network.
The camera is in firmware upgrade procedure.
The camera is connecting to a network.
The camera is connected to a network.
The camera is transferring data.
MicroSD Internet Power
Internet Port Power Jack
Figure 2-2 Rear Panel
3
Indication
WPS/Reset Button
WPS/
Reset