2.3.2 Rear Panel
Power Jack
Power Jack: The power jack is where you connect the power adapter to the camera.
RESET Button: While the camera is powered on, press the RESET button for 5 seconds until
the System LED on the front panel turns solid red. The camera will reset and reboot.
Note:
It is recommended to use a pen to press the RESET button on the camera. Do not use a
sharp object.
Heat Emission Holes: These holes are used for heat dissipation.
Figure 2-2 Rear Panel
4
NC210
HD Wi-Fi Cloud Camera
Heat Emission Holes
RESET Button