Basic > Wireless Connection - TP-Link NC450 User Manual


Subnet Mask: Enter the subnet mask in dotted-decimal notation. The default value is
"0.0.0.0."

Default Gateway: Enter the default gateway in dotted-decimal notation.

Primary DNS Server: Enter a DNS address in dotted-decimal notation.

Secondary DNS Server: Enter a DNS address in dotted-decimal notation.
Click Save to save and enable the settings.
4.3.3 Basic > Wireless Connection
The camera's wireless function is enabled by default. This function helps to connect your camera
to a wireless network wirelessly. If you don't want to use this function, just select the Disable
option.
 Scan: Click to scan the available wireless network. You will get or refresh the Wireless
Network List as shown below.
NC450 HD Pan/Tilt Wi-Fi Camera with Night Vision
16