TP-Link NC450 User Manual page 33

 FTP Server/ Port: Enter the IP or the domain (IP/domain without prefix ftp://) and the port of
the FTP server that you will be connecting to. The port is 21 by default.

Note:
The FTP server you set and the camera should be in the same LAN.
 Username: Enter the username that is used to log in to your FTP server.
 Password: Enter the password that is used to log in to your FTP server.
 Path: Enter the path to the destination on the FTP server.
 Passive Mode: Enabling passive mode may help you reach your FTP server if your camera is
behind a router protected by a firewall.
To set up a FTP to receive notification, follow the steps below:
NC450 HD Pan/Tilt Wi-Fi Camera with Night Vision
31