Section 5 - Connecting to a Wireless Network
It is recommended to enable wireless security (WEP/WPA/WPA2) on your wireless router or access point before configuring your wireless adapter.
If you are joining an existing network, you will need to know the security key or passphrase being used.
1. Open the Windows
Vista
®
computer icon in your system tray (lower right corner of screen). Select
Connect to a network.
2. Highlight the wireless network (SSID) you would like to connect to and click
Connect.
D-Link DWR-111 User Manual
Configure Wireless Security
Wireless Utility by right-clicking on the wireless
™
61