Honda 1998 Prelude Owner's Manual page 212

Replacing a High-mount Brake
Light Bulb
(Except Type SH model)
HIGH-MOUNT BRAKE
LIGHT ASSEMBLY
1. Remove the high-mount brake
light assembly by pushing it
slightly toward the rear windshield
and sliding it out of the rear shelf.
2. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
3. Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
4. Reinstall the socket. Turn it
clockwise until it locks.
5. Test the lights to make sure the
new bulb is working.
6. Reinstall the high-mount brake
light assembly on the rear shelf.
Make sure the tabs on the high-
mount brake light assembly fit
into the slots.
Maintenance
Lights