Honda 1998 Prelude Owner's Manual page 208

Replacing a Front Side Marker
Light Bulb
SCREW
1. Use a Phillips-head screwdriver to
remove the side marker assembly's
mounting screw.
2. Remove the side marker assembly
from the bumper.
BULB SOCKET
FRONT SIDE MARKER ASSEMBLY
3. Remove the socket from the side
marker assembly by turning it one-
quarter turn counterclockwise.
4. Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
5. Insert the socket back into the
side marker assembly. Turn it
clockwise to lock it in place.
6. Test the side marker to make sure
the new bulb is working.
7. Put the side marker assembly into
the bumper. Make sure the tab on
the side marker assembly fits into
the bumper slot. Tighten the
mounting screw.
Maintenance
Lights