Table of Contents
Advertisement
upwards. The cassette deck will automatically detect the
type of tape and switch the equalization automatically.
A cassette symbol on the display indicates that a tape is
in the mechanism. This symbol appears in all modes
except cassette mode.
The cassette will not be ejected when the system is
switched off or another mode is selected.
If a cassette is in the mechanism, cassette mode can be
selected by using the
If no cassette has been inserted, the display will show
"NO TAPE".
Audio system
Instruments
Operation
and controls
The system will switch to
cassette mode. Track 1 will be
played and "SIDE 1"
displayed. Track 1 is the side
of the cassette which is facing
TAPE
button.
Instrument
Driving
cluster display
Cassette eject
Press the
EJ
button. The display will fold down and
the cassette will be ejected. Remove the cassette, then
fold the display back up manually. The system will
switch back to radio mode automatically.
Notes:
The cassette will not be ejected when the system is
switched off. If a cassette is not ejected, continue to hold
the
button for at least 5 seconds to eject the
EJ
cassette.
Important!
If the display is in the down position for more than
20 seconds, 2 successive beeps will be heard. This will
continue at 5 second intervals until the display is
returned to its normal position.
171
Practical hints
Car care
Technical
Index
data
Advertisement
Table of Contents
