Table of Contents
Advertisement
To return menu "SETTINGS" (2) to its factory
setting:
• Call up the individual setting preliminary
display (1) or display (2).
• Press the reset knob on the instrument cluster
(see page 92) for approximately 3 seconds.
Display (3) will appear.
• Press the reset knob on the instrument cluster once
more. The menu "SETTINGS" is reset to factory
settings, acknowledged by display (4).
The individual setting preliminary display (1) will
appear if you do not press the reset knob on the
instrument cluster within about 5 seconds. The
setting menus will not be reset.
Multifunction steering wheel, multifunction display
Instruments
Operation
and controls
Instrument
Driving
cluster display
Note:
For safety reasons, the individual setting "LIGHT
CIRCUIT HEADLAMP MODE" in menu "LIGHTING"
cannot be reset while driving, see page 124. If an
attempt is made, the message "LIGHTING" – "CANNOT
BE COMPLETELY RESET TO FACTORY SETTINGS
WHILE DRIVING" will be displayed.
117
Practical hints
Car care
Technical
Index
data
Advertisement
Table of Contents
