Table of Contents
Advertisement
Daytime running lamp mode
Turn exterior lamp switch to position M or U.
When the engine is running, the low beam headlamps
are automatically switched on. In low ambient light
conditions the parking lamps will also switch on.
• Canada only:
When shifting from a driving position to
position "N" or "P", the low beam switches off
(3 minutes delay).
For nighttime driving the exterior lamp switch
should be turned to position B to permit
activation of the high beam headlamps.
Exterior lamp switch
Instruments
Operation
and controls
Instrument
Driving
cluster display
• USA only:
The high beam headlamps can also be activated
when driving with the daytime running lamp mode
activated and exterior lamp switch in position M.
To activate the daytime running lamp mode, see the
individual setting menu "LIGHTING" – "LIGHT
CIRCUIT HEADLAMP MODE" on page 122.
Note:
See page 137 for notes on the exterior lamp switch.
139
Practical hints
Car care
Technical
Index
data
Advertisement
Table of Contents
