Subaru 2012 Forester Owner's Manual page 490

12-16
Specifications
1) High beam headlight
2) Position light
3) Low beam headlight
Models with HID light
Models with halogen light
4) Front side marker light
5) Map light
6) Dome light
7) Front fog light
8) Front turn signal light
9) Door step light
10) Cargo area light
11) Brake/tail light
12) Rear turn signal light
13) Back-up light
14) Licence plate light
A)
High mount stop light
B)
Side turn signal light (if equipped)
Wattage Bulb No.
12V-60W 9005 (HB3)
168 (W5W)
12V-5W
12V-35W D2R
12V-55W H11
12V-5W 168 (W5W)
–
12V-8W
–
12V-8W
12V-51W 9006 (HB4)
12V-21W
(WY21W)
–
12V-5W
–
12V-13W
12V-21/5W 7443 (W21/5W)
12V-21W (WY21W)
12V-21W 7440
12V-5W 168 (W5W)
– –
– –
WARNING
. Bulbs may become very hot while
illuminated. Before replacing
bulbs, turn off the lights and wait
until the bulbs cool down. Other-
wise, there is a risk of burn injury.
. For models with HID low beam
headlights, observe the following
precautions. Not doing so carries
the risk of an electric shock that
could result in serious injury
because the HID bulbs use an
extremely high voltage.
– Do not replace any headlight
bulbs (both low beam and
high beam) by yourself.
– Do not remove/restore the
headlight assemblies by your-
self.
– Do not remove any headlight-
assembly components by
yourself.
For replacement, contact your
SUBARU dealer.