Screensaver (Type D Audio) - Subaru 2012 Forester Owner's Manual

Hide thumbs Also See for 2012 Forester:
Table of Contents

Advertisement

! Deleting registered cell phone from
the list
1. Select the "DELETE" menu.
2. Select a cell phone to be deleted by
performing either of the following proce-
dures.
– Operate the "TUNE/TRACK/CH"
dial.
– Press the talk switch
the voice tag.
3. Select the "CONFIRM" menu. "DE-
LETED" is displayed, the data is deleted
and the mode changes to the "PHONE
SETUP" mode.
! System setup
After selecting the "SYSTEM SETUP"
menu, perform the following procedures.
You can select the following menus only
by operating the "TUNE/TRACK/CH" dial.
! Setting guidance volume
To set the guidance volume, perform the
following procedure.
1. Select the "GUIDANCE VOL"/"GUI-
DANCE VOLUME" menu.
2. Set the guidance volume by operating
the "TUNE/TRACK/CH" dial.
! Initializing the registered data
To initialize the registered data, perform
the following procedure.
1. Select the "INITIALIZE" menu.
2. Select the "CONFIRM" menu. First
"PLEASE WAIT", then "INITIALIZED" is
displayed. The registered data is initia-
lized and the mode changes to the last
mode.
and say
! Selecting language
To select the language, perform the
following procedure.
1. Select the "SEL LANGUAGE"/"SE-
LECT LANGUAGE" menu.
2. Select the desired language by oper-
ating the "TUNE/TRACK/CH" dial.
Audio

Screensaver (type D audio)

If the following operations are not per-
formed for more than 30 seconds while
the audio is ON, the screensaver will be
displayed.
. Operate any button or dial
. Shift the shift lever/select lever to the
"R" position
. A cell phone registered in the Hands-
free system is called
If one of the following operations is
performed, the screensaver turns off and
the operation screen will be displayed.
. A cell phone registered in the Hands-
free system is called
. The update for satellite radio starts.
. The update for satellite radio stops.
If one of the following operations is
performed, the screensaver turns off.
However, the operation screen will not
be displayed.
. Operate any button or any dial in a
condition other than the following condi-
tions
– Pressing the
button while a
mode other than the CD mode is
selected
– Pressing the volume control buttons
of the audio control buttons
– CONTINUED –
5-55

Advertisement

Table of Contents
loading

Table of Contents