Bluetooth Setting - Subaru 2012 Forester Owner's Manual

! Ending a call
Press the ON hook switch
! Volume control
You can adjust the phone call volume, the
voice volume and the voice guidance
volume. Refer to "Volume control buttons"
F5-39.
! Adjustable level of each volume
Volume Range
Phone call 0 to 14
Voice 0 to 14
Voice guidance 0 to 6
& Bluetooth
.
! Security setting
After selecting the "SECURITY" menu,
perform the following procedures.
! Setting PIN code
The PIN code is a 4-digit number and is
used when locking the phonebook.
1. Select the "SET PIN" menu. Then
"CURRENT PIN?" is displayed.
2. Input the current PIN code by perform-
ing either of the following procedures.
– Operate the "TUNE/TRACK/CH"
dial.
– Press the talk switch
the number.
3. Select the "CONFIRM" menu.
4. Input the new PIN code by performing
either of the following procedures.
– Operate the "TUNE/TRACK/CH"
dial.
– Press the talk switch
Initial setting the number.
5. Select the "CONFIRM" menu.
7
7
! Locking the phonebook
3
1. Select the "PHBK LOCK"/"PHONE-
BOOK LOCK" menu. Then "CURRENT
PIN?" is displayed.
2. Input the PIN code by performing
®
setting
and say
and say
Audio
either of the following procedures.
– Operate the "TUNE/TRACK/CH"
dial.
– Press the talk switch
the number.
3. Select the "CONFIRM" menu. If the
inputted PIN code is correct, "LOCKED" is
displayed and the phonebook is locked.
NOTE
While the phonebook is locked, if the
operation restricted menu is selected,
"PHBK LOCK" is displayed.
! Unlocking the phonebook
1. Select the "PHBK UNLOCK"/"PHONE-
BOOK UNLOCK" menu. Then "CUR-
RENT PIN?" is displayed.
NOTE
If the phonebook is not locked, "UN-
LOCK" is displayed and the mode
changes to the security mode.
2. Input the PIN code by performing
either of the following procedures.
– Operate the "TUNE/TRACK/CH"
dial.
– Press the talk switch
the number.
3. Select the "CONFIRM" menu. If the
inputted PIN code is correct, "UN-
– CONTINUED –
5-53
and say
and say