Adjusting The Shock Absorber Assembly - Yamaha 2001 YZF-R6N Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
CAUTION:
@
Never attempt to turn an adjusting
mechanism beyond the maximum
or minimum settings.
@
NOTE:
@
Although the total number of clicks of a
3
damping force adjusting mechanism
may not exactly match the above spec-
ifications due to small differences in
production, the actual number of clicks
always represents the entire adjusting
range. To obtain a precise adjustment,
it would be advisable to check the num-
ber of clicks of each damping force ad-
justing mechanism and to modify the
specifications as necessary.
@
EC000015
Adjusting the shock absorber
assembly
This shock absorber assembly is
equipped with a spring preload adjust-
ing ring, a rebound damping force ad-
justing knob and a compression
damping force adjusting screw.
CAUTION:
@
Never attempt to turn an adjusting
mechanism beyond the maximum
or minimum settings.
@
3-17
EAU01863
EC000015
1. Spring preload adjusting ring
2. Special wrench
3. Position indicator
Spring preload
To increase the spring preload and
thereby harden the suspension, turn
the adjusting ring in direction a. To de-
crease the spring preload and thereby
soften the suspension, turn the adjust-
ing ring in direction b.
NOTE:
@
Align the appropriate notch in the ad-
justing ring with the position indicator
on the shock absorber.
@
CI-01E
Maximum (hard)
Setting 9 8 7
Stan- Minimum
dard (soft)
6 5 4 3 2 1