Storage Compartment - Yamaha 2001 YZF-R6N Owner's Manual

WARNING
_
Never ride with a helmet attached to
a helmet holder, since the helmet
may hit objects, causing loss of
control and possibly an accident.
_
To release the helmet from a helmet
holder
Remove the passenger seat, remove
the helmet from the helmet holder, and
then install the seat.
INSTRUMENT AND CONTROL FUNCTIONS
EWA00015
1. Rubber cap
2. Owner's tool kit
3. Hole (× 2)
4. U-LOCK bar (optional)
5. Lock of U-LOCK (optional)
6. Strap (× 2)

Storage compartment

The storage compartment is located
under the passenger seat. (See page
3-13 for passenger seat removal and
installation procedures.)
This storage compartment is designed
to hold a genuine Yamaha U-LOCK.
(Other locks may not fit.)
_
_
To place a U-LOCK in the storage
compartment:
1. Remove the rubber cap from the
EAU03728
2. Insert the ends of the U-LOCK bar
3. Place the lock of the U-LOCK un-
4. Securely fasten the U-LOCK bar
3-14
WARNING
Do not exceed the load limit of
3 kg for the storage compart-
ment.
Do not exceed the maximum
load of 189 kg for the vehicle.
hole at the bottom of the storage
compartment, and then store it in a
safe place to prevent losing the
cap.
into the holes at the bottom of the
storage compartment as shown.
der the curved part of the U-LOCK
bar as shown.
and lock with the strap as shown.
EWA00005
3