Handlebar Switches - Yamaha 2001 YZF-R6N Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
3
1. Pass switch "PASS"
2. Dimmer switch
3. Turn signal switch
4. Horn switch " "

Handlebar switches

Pass switch "PASS"
Press this switch to flash the headlight.
Dimmer switch
Set this switch to "
beam and to " " for the low beam.
Turn signal switch
To signal a right-hand turn, push this
switch to "
turn, push this switch to "
leased, the switch returns to the center
position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
Horn switch "
Press this switch to sound the horn.
EAU00118
EAU00120
EAU00121
" for the high
EAU00127
". To signal a left-hand
". When re-
EAU00129
"
3-7
1. Engine stop switch
2. Start switch " "
Engine stop switch
Set this switch to " " to stop the en-
gine in case of an emergency, such as
when the motorcycle overturns or
when the throttle cable is stuck.
Start switch " "
Push this switch to crank the engine
with the starter.
CAUTION:
@
See page 5-1 for starting instruc-
tions prior to starting the engine.
@
EAU00138
EAU00143
EC000005