Replacing A Turn Signal Light Bulb Or The Tail/Brake Light Bulb; Replacing The Auxiliary Light Bulb (Xvs11Awx) - Yamaha 2008 XVS11AWX Owner's Manual

Replacing a turn signal light
bulb or the tail/brake light bulb
1. Remove the lens by removing the
screws.
1. Screw
XVS11X
1. Screw
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU24281 XVS11AWX
1. Screw
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
CAUTION:
Do not overtighten the screws, oth-
erwise the lens may break.
Replacing the auxiliary light
bulb (XVS11AWX)
If the auxiliary light bulb burns out, re-
place it as follows.
1. Remove the headlight unit by re-
1. Screw
2. Remove the socket (together with
ECA10680
6-31
moving the screws.
the bulb) by pushing it in and turn-
ing it counterclockwise.
EAU33411
6