Vehicle - Mercedes-Benz 2013 C-Class Coupe Owner's Manual

Display messages
Tyre press. monitor
currently unavail‐
able
Wheel sensor(s)
missing
Tyre press. moni‐
tor inoperative No
wheel sensors
Tyre pressure mon‐
itor
inoperative
Vehicle (4-button multifunction steering wheel)
Display messages
To start engine,
shift to P or N
P
Select Park (P)
Possible causes/consequences and M Solutions
Due to a source of radio interference, no signals can be received
from the wheel sensors. The tyre pressure monitor is temporarily
malfunctioning.
X
Drive on.
The tyre pressure monitor restarts automatically as soon as the
cause has been rectified.
There is no signal from the tyre pressure sensor of one or several
wheels. The pressure of the affected tyre is not displayed in the
multifunction display.
X
Have the faulty tyre pressure sensor replaced at a qualified spe-
cialist workshop.
The wheels fitted do not have a suitable tyre pressure sensor. The
tyre pressure monitor is deactivated.
X
Fit wheels with suitable tyre pressure sensors.
The tyre pressure monitor is activated automatically after driv-
ing for a few minutes.
The tyre pressure monitor is faulty.
X
Visit a qualified specialist workshop.
Possible causes/consequences and M Solutions
You have attempted to start the engine with the transmission in
position R or D.
X
Shift the transmission to position P or N.
You have switched off the engine with the Start/Stop button and
opened the driver's door.
You wanted to lock the vehicle.
A warning tone also sounds.
or
You have switched off the engine with the Start/Stop button and
opened the driver's door with the transmission in position N.
X
Shift the transmission to position P.
Display messages
273
Z