Table of Contents
Advertisement
1 2 3 4 5 6 (Preset buttons)
These buttons are used to preset and
tune in radio stations.
To preset a station to a button: Tune in
the desired station (see "TUNE" or "SEEK"
button). Push and hold down the button
until you hear a beep⎯this will set the
station to the button. The button number
will appear on the display.
To tune in to a preset station: Push the
button for the station you want. The but-
ton number and station frequency will ap-
pear on the display.
These systems can store one AM and two
FM stations for each button (The display
will show "AM", "FM1" or "FM2" when you
push "AM" or "FM").
(Eject button)
Push the cassette tape eject button to
eject a cassette. Push the compact disc
eject button to eject a compact disc.
After you turn the ignition to "LOCK", you
will be able to eject a cassette or disc but
you will not be able to reinsert it.
126
(Reverse/Fast forward buttons)
Cassette Player
Push the fast forward button to fast for-
ward a cassette tape. "FF" will appear on
the display. Push the reverse button to
rewind a tape. "REW" will appear on the
display.
To stop the tape while it is fast forward-
ing,
push
the
fast
forward
"TAPE"; to stop the tape while it is re-
winding,
push
the
reverse
"TAPE".
If a tape side rewinds completely, the cas-
sette player will stop and then play that
same side. If a tape fast forwards com-
pletely, the cassette player will play the
other side of the tape, using the auto−re-
verse feature.
Compact Disc Player
If you want to fast forward or reverse
through a compact disc track, push and
hold in the fast forward or reverse button.
When you release the button, the compact
disc player will resume playing.
AM⋅FM
Push "AM⋅FM" to switch between the AM
and FM bands. "AM", "FM1" or "FM2" will
appear on the display. These systems al-
low you to set twelve FM stations, two for
each button.
If the audio system is off, you can turn
on the radio by pushing "AM⋅FM". Also,
push "AM⋅FM" to switch from cassette or
button or
compact disc operation to radio operation.
AUDIO CONTROL / MODE
button
or
Manual tone adjustment function—
This knob is used to adjust the tone
manually.
For
low−pitch
tone
"AUDIO CONTROL / MODE" repeatedly
until "BAS" appears on the display. Then
turn the knob to suit your preference.
The display will show the range from
"BAS −5" to "BAS 5".
For middle−pitch tone adjustment, push
"AUDIO CONTROL / MODE" repeatedly
until "Mld" appears on the display. Then
turn the knob to suit your preference.
The display will show the
"Mld −5" to "Mld 5".
adjustment,
push
range from
Advertisement
Table of Contents
