Helmet Holder - Yamaha DragStar XVS1100A Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
XVS1100A
3
1. Bolt
Rider seat
To remove the rider seat
1. Remove the passenger seat.
2. Remove the bolt, and then pull the
rider seat up.
XVS1100A
1. Projection (× 2)
2. Seat holder (× 2)
To install the rider seat
1. Insert the projections on the front
of the rider seat into the holders as
shown, place the seat in the origi-
nal position, and then install the
bolt.
2. Install the passenger seat.
NOTE:
@
Make sure that the seats are properly
secured before riding.
@
3-13

1. Helmet holder

Helmet holder
To open the helmet holder, insert the
key into the lock, and then turn the key
as shown.
To lock the helmet holder, place it in
the original position, and then remove
the key.
WARNING
@
Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of
control and possibly an accident.
@
EAU00260
EW000030