452
7-3. Do-it-yourself maintenance
■
When installing the rubber cover of the headlight
Ensure the rubber cover is securely attached.
1
Fit the rubber cover outer circumfer-
ence in firmly.
2
Fit the rubber cover around the light
bulb in until the light bulb plug can be
seen.
■
When replacing the light bulbs
Confirm that they are properly engaged with the bulb base and that there is
no light leakage.
■
LED Lights
The parking lights (LED type), daytime running light (LED type) and side turn
signal lights consist of a number of LEDs. If any of the LEDs burn out, take
your vehicle to your Toyota dealer to have the light replaced.
■
Condensation build-up on the inside of the lens
Temporary condensation build-up on the inside of the headlight lens does not
indicate a malfunction. Contact your Toyota dealer for more information in the
following situations:
●
Large drops of water have built up on the inside of the lens.
●
Water has built up inside the headlight.