Table of Contents
Advertisement
Voice command system
The voice command system enables the hands-free system to
be operated using voice commands.
Operations of the voice command system can be performed by
selecting the menu corresponding to each function on the
screen. Even if any menu is selected, commands displayed on
all menus can be operated.
Using the voice command system
1
Press the talk switch.
To cancel the voice command sys-
tem, press and hold the talk switch.
2
After a beep sounds, say the desired command.
On the list screen, you can select the desired command.
■
Microphone
P. 297
■
When using the microphone
●
It is unnecessary to speak directly into the microphone when giving a com-
mand.
●
It is not necessary to wait for the confirmation beep before speaking a com-
mand.
●
Voice commands may not be recognized if:
• Spoken too quickly.
• Spoken at a low or high volume.
• The roof or windows are open.
• Passengers are talking while voice commands are spoken.
• The air conditioning speed is set high.
• The air conditioning vents are turned towards the microphone.
●
In the following conditions, the system may not recognize the command
properly and using voice commands may not be possible:
• The command is incorrect or unclear. Note that certain words, accents or
speech patterns may be difficult for the system to recognize.
• There is excessive background noise, such as wind noise.
5-10. Using the voice command system
325
5
Advertisement
Table of Contents
Troubleshooting
