Yamaha 2006 YZF-R6V Owner's Manual page 58

PERIODIC MAINTENANCE AND MINOR REPAIR
1. Cowling D
2. Bolt
3. Turn signal light lead coupler
4. Quick fastener
6
1. Quick fastener
1. Quick fastener screw
To install the cowling
1. Place the cowling in the original
position, and then install the bolts,
quick fasteners, and quick fastener
screw.
2. Connect the turn signal light lead
coupler.
3. Install cowling A (to complete the
installation of cowling C) or cowl-
ing B (to complete the installation
of cowling D).
Cowling E
To remove the cowling
1. Remove cowling B and panel B.
(See page 6-6.)
6-8
2. Unfasten the wire harness by
pressing on the tab to open the
plastic fastener.
1. Plastic fastener
2. Tab
3. Wire harness
3. Remove the bolts and the quick
fastener, and then pull the cowling
off as shown.
EAU39091