Handlebar Switches - Yamaha 2006 YZF-R6V Owner's Manual

G
Be sure to set the deactivation
function to a higher engine speed
than for the activation function,
otherwise the shift timing indicator
light will remain deactivated.
1. Push the "RESET" button to select
the desired engine speed for deac-
tivating the indicator light.
2. Push the "SELECT" button to con-
firm the selected engine speed.
The control mode changes to the
shift timing indicator light bright-
ness function.
To adjust the shift timing indicator light
brightness
1. Push the "RESET" button to select
the desired indicator light bright-
ness level.
2. Push the "SELECT" button to con-
firm the selected indicator light
brightness level. The right display
will return to the odometer or trip-
meter mode.
INSTRUMENT AND CONTROL FUNCTIONS

Handlebar switches

Left
1. Pass switch " "
2. Dimmer switch " / "
3. Turn signal switch " / "
4. Horn switch " "
5. Hazard switch " "
3-13
EAU12344 Right
1. Engine stop switch "
2. Start switch " "
Pass switch "
Press this switch to flash the headlight.
Dimmer switch "
Set this switch to "
beam and to " " for the low beam.
Turn signal switch "
To signal a right-hand turn, push this
switch to " ". To signal a left-hand
turn, push this switch to "
leased, the switch returns to the center
3
/ "
EAU12350
"
EAU12400
/ "
" for the high
EAU12460
/ "
". When re-