Replacing An Auxiliary Light Bulb - Yamaha 2011 MT01A Owner's Manual

Replacing an auxiliary light
bulb
This model is equipped with three aux-
iliary lights. If an auxiliary light bulb
burns out, replace it as follows.
1. Auxiliary light bulb A
2. Auxiliary light bulb B
3. Auxiliary light bulb C
1. Remove the headlight unit by re-
moving the bolts on each side.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU36842
1. Bolt
TIP
Skip steps 2 and 7 if the auxiliary light
bulb A is being replaced.
2. To replace auxiliary light bulb B or
C, remove the corresponding
headlight unit side cover bracket
and the headlight unit side cover
by removing the screws.
1. Screw
2. Headlight unit side cover bracket
3. Headlight unit side cover
3. Remove the socket (together with
1. Auxiliary light bulb socket
4. Remove the burnt-out bulb by pull-
7-33
the bulb) by turning it counter-
clockwise.
1
1
ing it out.
7
1