Multi-Function Display - Yamaha 2011 MT01A Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
Immobilizer system indicator light
The electrical circuit of the indicator
light can be checked by turning the key
to "ON". The indicator light should
come on for a few seconds, and then
go off.
If the indicator light does not come on
initially when the key is turned to "ON",
or if the indicator light remains on, have
a Yamaha dealer check the electrical
4
circuit.
When the key is turned to "OFF" and 30
seconds have passed, the indicator
light will start flashing indicating the im-
mobilizer system is enabled. After 24
hours have passed, the indicator light
will stop flashing, however the immobi-
lizer system is still enabled.
The self-diagnosis device also detects
problems in the immobilizer system cir-
cuits. (See page 4-7 for an explanation
of the self-diagnosis device.)
EAU38624

Multi-function display

1. Clock
2. "RESET" button
3. Tachometer
4. "SELECT" button
5. Speedometer
6. Odometer/tripmeter/fuel reserve tripmeter
WARNING
Be sure to stop the vehicle before
making any setting changes to the
multi-function display.
settings while riding can distract the
operator and increase the risk of an
accident.
The multi-function display is equipped
with the following:
G a speedometer
G
EAU36948
G
G
G
G
G
G
TIP
Be sure to turn the key to "ON" before
using the "SELECT" and "RESET" but-
tons except for setting the brightness
control mode.
EWA12312
Changing
4-5
a tachometer
an odometer
two tripmeters (which show the
distance traveled since they were
last set to zero)
a fuel reserve tripmeter (which
shows the distance traveled since
the fuel level warning light came
on)
a clock
a self-diagnosis device
a brightness control mode