Honda 1997 Accord Wagon Owner's Manual page 144

2. Disconnect the blade
assembly from the wiper arm
by pushing in the lock tab.
Hold it in while you push the
blade assembly toward the
base of the arm.
3. Remove the blade from its holder
by grasping the tabbed end of the
blade. Pull firmly until the tabs
come out of the holder.
BLADE
4. Examine the new wiper
blades. If they have no plastic
or metal reinforcement along
the back edge, remove the
metal reinforcement strips
from the old wiper blade, and
install them in the slots along
the edge of the new blade.
REINFORCEMENT
5. Slide the new wiper blade into
the holder until the tabs lock.
6. Slide the new blade assembly
onto the wiper arm. Make sure
it locks in place.
7. Lower the wiper arm down
against the windshield.
Maintenance
BLADE