Harness Buckle; Adjusting The Harness Height - Britax Boulevard CS User Manual

Child Seat Functions

Harness Buckle

Fastening the Harness Buckle
1 Hold the harness buckle with one hand.
2 Use your other hand to insert one buckle
tongue at a time into the harness buckle
(Fig. A).
• A proper connection is confirmed with an
audible click after inserting each buckle
tongue.
Releasing the Harness Buckle
1 Brace the rear of the harness buckle with
one hand.
2 Use your thumb to press the release button
and slide both buckle tongues to remove
from the buckle (Fig. B).
IMPORTANT: Periodically clean the harness
buckle to ensure safe operation. See page 39.
32

Adjusting the Harness Height

IMPORTANT:
Adjustments on pages 6–7 for instructions on
proper harness fit based on your child's height
and weight.
1
A
2
NOTE: DO NOT force the head restraint adjustment knob in either
direction. If the knob is difficult to turn, the head restraint may be at
maximum or minimum height, the harness may be tight, or the child's
weight is pressing against the head restraint cover.
B
See Important Harness
Loosen the harness by lifting the harness
adjuster lever while pulling the harness
straps forward as far as possible.
Rotate the head restraint adjustment knob
on either side of the child seat to raise or lower the head restraint
and harness (Fig. C).
Child Seat Functions
C
33