Panasonic BB-HGW700A Operating Instructions Manual page 54

Operating Instructions
6.
After checking the setting information, click
[Restart].
Data Entry Field
Encryption
Network key
Renewal interval
Data encryption
Notes
• When modifying the encryption setup of this product after a wireless camera etc. has been
registered automatically, it is necessary to match the wireless camera's settings.
• When this product is using WPA-PSK(TKIP), if connected wireless devices have the same network
key, they may be able to connect to this product using either the TKIP or AES encryption.
54
Select from Disabled, WEP, and WPA-PSK/WPA2-PSK. The method with
the highest security is WPA-PSK/WPA2-PSK, followed by WEP, then
Disabled. (Factory Default is WEP.)
Enter between 8 and 63 alphanumeric characters, or 64 hexadecimal
characters. When encrypting, it is necessary to set the same network key
on the device receiving the data. The set network key is only displayed
once, so make a note of it if necessary.
Set the interval for refreshing the encryption key.
• Set a value between 30 and 604800 seconds. 604800 seconds is the
equivalent of one week.
Select from WPA-TSK(TKIP), and WPA2-PSK(AES), and AUTO.
• WPA-PSK(TKIP)
TKIP can prevent WEP key analogy, spoofing and data falsifying, by
dynamically changing the WEP key, and has better security than WEP.
• WPA2-PSK(AES)
AES is a next generation encryption method appointed by the National
Information System for Science and Technology (NIST), and has better
security than TKIP.
• AUTO
Allows this product to switch between TKIP and AES automatically, to
match the terminal.