4.4.2
Re-obtaining an IPv6 Global Address
1.
Select [Start]
[Accessories]
click.
•
The command prompt is started.
2.
Enter "netsh" and press [Enter].
3.
On the netsh command line, enter "interface
ipv6", and press [Enter].
4.
Enter "renew", and re-obtain an IPv6 global
address.
5.
Enter "exit", press [Enter], and end the netsh
command.
4.4.3
Setting a Static IPv6 Global Address.
1.
Perform steps 1, 2, and 3 in Re-obtaining an
IPv6 global address above.
2.
Enter "show interface", and press [Enter].
•
Take a note of the Idx number of the Local
Area Connection.
3.
Next, enter "set address interface=* the IPv6
global address type=unicast", and press
[Enter].
•
After "interface=", enter the Idx number
noted in step 2.
4.
Enter "exit", press [Enter], and end the netsh
command.
[All Programs]
[Command Prompt] and
[For assistance, please call: 1-800-272-7033]
Operating Instructions
127