Mode Setup - Panasonic WJ-NT104 Operating Instructions Manual

MODE SETUP

On the ADMINISTRATOR SETUP PAGE, click the MODE SETUP button to display the MODE SETUP window.
Select the operation mode, image quality and camera control.
q
e
r
t
y
q VIDEO INPUT SELECTION MODE
Select an operation mode for the camera displayed on
the monitor.
The factory default setting is RANDOM INPUT SELEC-
TION MODE.
w INPUT CHANNEL
This item is available in FIXED INPUT SELECTION
MODE only. Select a channel for display on the moni-
tor.
The factory default setting is CH1
e VIDEO INPUT CHANNEL ON/OFF
This item is available in RANDOM INPUT SELECTION
MODE or MULTI INPUT SELECTION MODE only.
• RANDOM INPUT SELECTION MODE
Channels set to OFF will not be displayed. In
sequence mode, such channels are skipped.
• MULTI INPUT SELECTION MODE
If a channel set to OFF is selected, the frame rate
goes up because images are captured by skipping
the channel set to OFF.
The factory default setting for channels are ON.
41
r INPUT CHANNEL SEQUENCE
This item is available in RANDOM INPUT SELECTION
MODE only.
Set sequence operation to ON or OFF.
The factory default setting is OFF.
t SEQUENCE INTERVAL
This item is available in RANDOM INPUT SELECTION
MODE only. It defines the dwell time (time until
changeover to the next channels) for sequence opera-
tion.
Dwell time can be set to a value between 1 and 30 sec-
onds in increments of 1 second.
The factory default setting is 2 Sec.
y MAIN PAGE DEFAULT INDEX FILE SELECT
Set the window to be displayed when only a URL is
specified on the LOCATION bar.
Note: If OTHERS is marked, the name specified next to
File name will open the MAIN PAGE window.
The factory default setting is index1.html