Table of Contents
Advertisement
Installation free set up
You can use Wireless Manager ME 4.0 without installing it in the computer.
If you copy Wireless Manager ME 4.0 to a removable medium, such as an SD card, you can use Wireless Manager ME 4.0
without installing it in any computer that permits you to access this removal medium.
Note
When copying Wireless Manager ME 4.0 to a removable medium, empty capacity of at least 32 MB is required.
1
Insert provided CD-ROM into the CD-ROM drive.
Setup screen appears.
2
Click [Installation Free Set Up].
[Direct CD-ROM Startup] and [Other Media Source Startup, Make Copy Here] appear on the window.
3
When using without copying the program: Click [Direct CD-ROM Startup].
A
Wireless Manager ME 4.0 starts up, and the "Select Access Port" window appears.
Operation is the same as when operating after installing CD-ROM. (See page 14)
When using after copying the program: Click [Other Media Source Startup, Make
B
Copy Here].
A window opens to select the destination to save.
<If you chose
in step 3, follow steps 4-5.>
B
4
Select the destination to save, and click [OK].
CD-ROM data is copied to the destination.
After the copy ends, click [Close] of the setup screen.
5
Double-click the Wireless Manager ME 4.0 icon (WM.exe) in the destination to save
chosen in step 4.
Wireless Manager ME 4.0 starts up.
Operation is the same as when operating after installing CD-ROM.
If selecting removable medium as the destination to save, ensure that the removable medium is recognized by the
computer to which you wish to connect the unit.
Some removable mediums start the program automatically.
Notes
• When using without installing, following functions are not available.
• Selective area transmission (See page 34)
• Secondary display transmission (See page 35)
• Producing audio along with video at live mode
• Automatic connection by double-clicking (see page 40)
• Operation is slower compared to when the computer is used with Wireless Manager ME 4.0 installed.
Software Uninstall
Wireless Manager ME 4.0
From the desktop, select [Start] → [All Programs] → [Panasonic Wireless Display] →
[Uninstall Wireless Manager mobile edition 4.0].
Follow the instructions appearing on the screen and uninstall the software.
13
Advertisement
Table of Contents
