RadioLink Ei168RC Instruction Manual page 15

RadioLINK devices instructing them to exit the
HOUSE CODE SWITCH
house code mode.
Note: Some RadioLINK devices do not support
the on demand exit house code feature. You may
allow them to automatically exit house code
after the time period or if you wish, you can do
BLUE LIGHT
it manually. Consult the individual RadioLINK
device manual for further instructions.
Check the communication by pressing the test/
hush button for up to 20 seconds on each unit
in turn. The red light will flash, the Alarm will
sound and blue light on the RadioLINK Base
sidewall will illuminate continuously for around
3.5 seconds. All other Alarms should sound (this
may take up to 20 seconds).
If all the units are not communicating consult
the "Troubleshooting the RF link" section for
information on how to resolve the problem.
15