Receiver Front; Receiver Rear - Avol itrio User Manual

Operation Control & Function

Receiver Front

■
1
2
3
4
5
6

Receiver Rear

■
1
2
3
4
5
6
7
8
Description
Blink : System booting or establishing link between the transmitter and the receiver.
○
Quick Blink : Software upgrading or wireless/LAN mode switching.
○
1 Power/Link LED
On : Finish of link establishment is completed between the transmitter and the
○
receiver.
2 HDMI It will be on when the HDMI-OUT port is selected for the video output.
3 COMPO
It will be on when the COMPONENT-OUT port is selected for the video output.
It will be on when the AV-OUT port (composite or SCART) is selected for the video
4 AV
output.
5 IR window IR receiving window from remote control.
Press it shortly to turn the power on.
○
When power on,
○
Power and - Press shortly : Press to select the video input source. Each press the power
6
button will cycle through the available video input "HDMI → COMPO →AV
Source Button
→ HDMI " in sequence.
- Press longer : Press and hold more than 3 seconds to turn the power off.
Description
1 HDMI-OUT
HDMI output port
2 AV-OUT Composite or Scart output port
Connect additional IR Extender in order to extend receiving the
3 IR-IN
remote control.(purchase separately)
4 AUDIO-OUT Stereo Audio output port
5 COMPONENT-OUT
Component output port
This USB port is for software upgrade.
6 USB
(For more information, please refer to Software upgrade on page 17. )
LAN cable will be used for the following feature
Connection to PLC modem
○
7 LAN
Direct connection to LAN cable
○
Connection to PC for the system configuration setting
○
8 DC
Power input port
Function
Function
9