Product Specification
Software upgrade
■
1)
Download up-to-dated software (itrio.img) at web page (www.i-trio.com)
2)
Store this S/W in "root directory" of USB memory.
3)
Plug USB memory into the USB port of the receiver.
4)
With LEDs blinking, the receiver and the transmitter will be upgraded in sequence.
(It takes around 5 minutes)
5)
When the refreshing is completed, the product will be rebooted.
Important Notice)
a.
Update is available only when the transmitter and the receiver operate normally.
b.
NEVER remove the power during update.
(If the power is off during upgrading, the product will not work again.)
c.
During the update, screen does not display the video.
d.
When the product reboots again, you can remove the USB Memory.
21