Function Buttons - Miele PT 8807 Operating Instructions Manual

Function buttons

f Stop/End
The function button on the right-hand side is used to
stop a programme after it has started. Pressing it
again finishes the programme.
[ Block plus
The relevant programme block (e.g. Pre-dry) is
added to the programme.
FC Settings
Press this button to switch to another
language temporarily.
m
Start time
Pressing this button before the start of a programme
displays the message that a start time can be
selected.
K Information
Press this button to call up programme
information in the display.
ü Change order
The order of the programme in progress can be
changed or programme blocks can be repeated.
A Back
Takes you back to the previous display.
e/- Indicates that there is more
information on next or previous line.
S
Save
See the programming instruction booklet.
$
Programme locked
Once a locked programme has been started, the End
button can only be used to stop and cancel it during
the first minute.
% Programme unlocked
\ Operating data
Data transfer
Guide to the machine
Chip card operation
The chip card is supplied without any programmes.
See the programming instruction booklet for
information on transferring data from the control unit
to the chip card and vice versa.
The chip card can store a maximum of 30
programmes, each with 6 blocks.
The back of the chip card can be labelled.
9