After Sales Service - Miele PT 8807 Operating Instructions Manual

Problem solving guide
Power cut
y
Programme stop
Press the start button.
^ The programme can be continued by pressing the
"Start" button.
Heating system fault
§
Programme stopped. Press the start button.
Programme will run without heating
^ To continue the programme without heating press
the h "Start" button.
Call the Service Department.
Heating system fault
§
Call the Service Department
if restart does not work.
^ Call the Service Department.
Pressure monitor fault
§
Call the Service Department
if restart does not work
^ If the programme still will not start please call the
Service Department.
Gas system fault
§
Call the Service Department
if restart does not work.
If this message appears after a programme has been
started:
^ Open the gas tap and then press the "Start" button.
If this message appears during a programme the
pressure in the gas supply has dropped because of
other gas heated appliances operating at the same
time.
^ Press the "Start" button.
^ If the programme still will not start please call the
Service Department.
29
Card fault
§
Card incorrectly inserted in card reader.
f
^ Insert the card the right way round in the card
reader.

After sales service

In the event of any faults please contact your Dealer
or the nearest Service Department.
When contacting the Service Department, please
f
quote the Model, Serial number (SN) and Material
number (M.Nr) of your machine. These are shown on
the data plate.
This is visible above the door aperture or at the back
of the machine.
f
Please let the Service Department know any error
message that has appeared in the display.
Should you require spare parts ensure that you only
use genuine original Miele Spare Parts (and
remember to let the Spare Parts
Department know the model, serial number and
material number of your machine).
f
f
A