Arris VIP2102 Installation Manual page 3

At least
2 inches/
5 cm
2 inches/
5 cm
Follow these important safety guidelines when positioning and connecting your IPTV
Receiver:
• Do not block the slots and openings.
• Do not place anything on top of the IPTV Receiver.
• Do not position the IPTV Receiver in a confined space, such as an enclosed cabinet,
that does not provide adequate ventilation.
• Do not position the IPTV Receiver near any external heat source that could raise
the temperature around the unit. Do not place the terminal on top of another heat
producing electronic device.
• Allow for adequate ventilation around the IPTV Receiver to maintain normal operating
temperature. Do not place it in a sealed enclosure without providing for adequate
airflow.
• Do not plug the AC power adapter into a switched power outlet.
• A coaxial cable screen shield needs to be connected to the earth at the building
entrance per ANSI/NFPA 70, the National Electrical Code (NEC), in particular Section
820.93, Grounding of Outer Conductive Shield of a Coaxial Cable.
This manual includes the manufacturer's recommended safeguards and all the information
needed to connect your receiver to both your in-home IP network and your entertainment
system. The safety and installation information was developed and provided primarily by
the receiver manufacturer, ARRIS Enterprises, Inc.
VIP2102 High-Definition IPTV Receiver Installation Manual
V E N T I L A T E
VIP2102
2 inches/
5 cm
iii