Options; Status Indicator - Bosch Logixx 10 WTB76556GB Instruction Manual And Installation Instructions

Volume of the signal
Your dryer outputs different signals.
Signal Type
Start Short tone
Iron Dry Sequence
of medium
length tones
End Sequence
of short
tones
Mal Sequence
operation of long
tones
Warning Sequence
of mal of long
function tones
You can change the volume of the
adjustable signals:
q Press and hold the Select button.
off
increasingly
maximum
Spin Speed
To optimize the remaining time display,
the spin speed at which the laundry
was previously spun in the washing
machine can be entered.
i
The B symbol is only displayed
for adjustment.
18

Options

Comment
Adjustable
volume
Adjustable
volume
Adjustable
volume
Low Heat
Press the Low Heat Jbutton for
Adjustable
temperature sensitive textiles. Observe
volume
the care information or symbols on the
textiles. The temperature of the drying
process is reduced, the drying time is
Maximum
extended.
volume
i
For textiles which are especially
temperature sensitive (e.g. founda
tion garments and trousers) press
the Low Heat J button and set
the additional option Extra Care
(see Page 17), to further reduce
the temperature of the drying
process.
Reduced Ironing
To prevent the laundry from creasing,
the dryer drum rotates at specific
intervals following the drying program.
Standard setting for this function is
1 hour.
If the Reduced Ironing f button is
pressed, this function is extended to
3 hours.
The laundry remains loose and fluffy
until it is removed. The laundry should
be removed at the latest after this time
has elapsed.
J
f

Status indicator

The dryer uses an electronic system
for all programmes except the time
programmes and the special Woollens
programme. A moisture sensor
continuously checks the moisture in the
laundry. Drying ends automatically as
soon as the selected degree of dryness
has been reached.
The drum continues to rotate at
specific intervals for one hour to
prevent creasing.
The current state of the process and
the level reached during the
programme sequence is indicated via
indicator lights (Drying, Iron Dry,
Cupboard Dry, Anti Crease/end).
i
If the indicator light Anti Crease/
end illuminates when the pro
gramme selector is in Off position
pull the mains plug out and inform
the customer service.