Reattaching The Refrigerator Doors; Disassembling The Flex Door - Samsung rf30hbedbsr User Manual

REATTACHING THE
REFRIGERATOR DOORS
To reattach the fridge doors after you have moved
the fridge to its final location, assemble the parts in
reverse order.
1. The Water Line must be fully inserted into the
center of the transparent coupler (Type A) or the
Guide Lines (Type B) to prevent water leakage
from the dispenser.
2. Insert the clip in the install pack, and then
confirm that it holds the line firmly.
Type A Type B
coupler
clip A (1/4")
(6.35 ram)
DISASSEMBLING THE FLEX
DOOR
1. Take out the Flex Zone ( 1 ) by lifting it up.
2. Take off the cover ( 2 ) with the harness using a
flat head screwdriver (-).
3. Press the locking tab and separate the Wire
Connector.
4. Remove 1 hex head bolt from each side with a
socket wrench (10 mm).
Engl sh - 13