Samsung rf30hbedbsr User Manual page 12

4. Open the door (more than 90°), lift f rom the
middle hinge, and then remove the door.
Due t oitsdesign features, you can disassemble
and re-assemble the door only w hen the
door isopen. (The h oles inthe Door Shaft
and t he Door Middle Hinge are deliberately
tilted a tspecific angles so that i tisdifficult to
disassemble and re-assemble with the door
closed.)
/_ CAUTION
Place the door, inside facing up, on a non-
scratching surface.
Door Middle Hinge Auto Closing Hinge
, At
Check the direction
If the Auto Closing Hinge is aligned to be
vertical as shown in the figure, align it to be
parallel by using the Door Middle Hinge. (See
Step 5 on the right for instructions explaining
how to disassemble the Door Middle Hinge.)
z_ CAUTION
Do not use a flat head screwdriver to align the
Auto close Hinge. It may get damaged. Use the
Door middle Hinge instead.
Remove the screw ( 8 ) attached to the
lower left and right door hinges with a philips
screwdriver (+).
Remove the 2 hex head bolts ( 9 ) attached to
the lower left and right door hinges with an allen
wrench (3/16").
Remove the lower left and right door hinges
(10).
(8)
II _-_ Allen wrench _
EngI sh - 12