Cooling with dehumidification
1
Remove the left-hand end of the flexible
hose from its storage position.
4
Make sure that the tube is not kinked or
curved too tightly.
7
The unit is now ready for cooling.
Ensure that the warm air discharged
from the end of the hose is not
obstructed.
GB - 4
2
Attach the air outlet vent to the end of
the flexible tube.
5
Hold the hose end in position with the
fastening strap and suction cup.
8
Turn the mode selector to TURBO
cooling or to SILENT cooling.
3
Move the air conditioner close to the
window, stretching the hose as little as
possible (max. extension 1100 mm).
Place the air outlet end of the flexible
hose outside the window.
6
Plug the unit in.
Open the air flow direction guide vane.
9
TURBO
SILENT
The cooling mode indicator light
on the control panel is illuminated.