Setting Network Parameters; Setting The Computer Ip Address; Logging In To The Web Management Page; Setting Network Access Parameters - Huawei HG658 V2 User Manual

3

Setting Network Parameters

Setting the Computer IP Address

Before logging in to the HG658 V2 web management page, set the IP address of the computer that
will be used for the login.
On Windows 7
1. Click in the lower right corner of your desktop. Choose Open Network and Sharing Center.
2. Choose Change adapter settings. Right-click Local Area Connection and choose Properties.
3. Double-click Internet Protocol Version 4 (TCP/IPv4).
4. Select Obtain an IP address automatically and Obtain DNS server address automatically. Click OK.

Logging In to the Web Management Page

The HG658 V2 provides an intuitive web management page where you can view or set the HG658 V2
parameters.
Before you log in to the HG658 V2 web management page, ensure that the computer used for
the login is connected to the HG658 V2 and has been configured to automatically obtain an IP
address or assigned with a static IP address.
1. Open a browser. In the address box, enter 192.168.1.1. Press Enter.
2. Enter the login user name (user by default) and password (HuaweiUser by default). Click Login.
To protect against unauthorized access, change the user name and password after the first
Caution
login.

Setting Network Access Parameters

Configuring an Automatical Connection to Access the Internet
TheHG658 V2 supports you to choose the proper connection mode automatically to access the
Internet, meaning you do not need to install dial-up software or perform dial-up operations on your
computer and just following the wizard page.
To set up an automatical connection to access the Internet:
1. Log in to the web management page.
2. Choose Home tab, click Start Wizard.
8