Using The Configuration Tool; Restoring Default Settings; Using The Reset Button - Huawei HG658 V2 User Manual

7. In New password, enter a new password, in Confirm password, enter the new password again.
8. Click Save.
After the user name and password are changed, the login page is displayed. Enter your new user
name and password to log in.
If you forget the password, you can restore the default settings by pressing and holding the
Reset button on the rear panel of the HG658 V2 for over 6 seconds. The user name and
password used for logging in to the web management page are then restored to their default
values. After the HG658 V2 is restored to its default settings, all user customized data will be
lost. Perform this operation with caution.

Restoring Default Settings

Using the Reset Button

If you forget the login password to the web management page or could not access the web
management page, use the reset button on the HG658 V2 rear panel to restore the HG658 V2 to its
default settings. Perform this operation with caution. After the HG658 V2 is restored to its default
settings, all custom data and settings will be lost, and the password will be restored to HuaweiUser.
1. Press the HG658 V2 power button to power the HG658 V2 on.
2. Press and hold the reset button for 6seconds or more.
The HG658 V2 will restart, which will cause temporary network interruptions.
After the HG658 V2 is restored to its default settings, change the computer IP address so that it is in
the same network segment as the 192.168.1.1 default IP address.

Using the Configuration Tool

If the HG658 V2 parameter settings were configured incorrectly, log in to the web management page
to restore the HG658 V2 to its default settings. Perform this operation with caution. After the HG658
V2 is restored to its default settings, all custom data and settings will be lost, and the password will
be restored to HuaweiUser.
35