Table of Contents
Advertisement
Configure Routing
By routing function, a computer network can be achieved between different subnets for data
forwarding, so not in the same subnet as the computer can communicate.
Configure Static Routing
By setting a static route, you can send the information from source IP address to the destination IP
address through a specified path.
1.
Log in to the web management page.
2.
Choose Internet tab.
3.
In the navigation tree, choose Routing Rules.
4.
Select Static Routing configuration page.
5.
Click New static route.
6.
In Destination network address, enter the IP address of the destination computer that you want to
send information.
7.
In Destination subnet mask, enter the subnet mask of the destination computer that you want to
send information.
8.
In Default gateway, enter the IP address of the destination computer which will be received the
packet.
9.
In Source IP address, enter the subnet mask of the source computer that you want to send
information.
10.
In Source subnet mask, enter the subnet mask of the source computer that you want to send
information.
11.
In Interface, select a LAN interface that receives packets.
12.
Click Save.
25
Hide quick links:
Advertisement
Table of Contents
